Totalt
    Vis handlekurv
    Varenummer:
    DC2

    Standard Breather Filter 1" Multi-Fit (NPT, BSPT, NPSM)

    Leverandør:
    Des-Case
    Dimensjon:
    H15,5xD10 cm
    Vekt:
    0
    Lager:
    5
    standard breather filter 1 multi fit npt/ bspt/ npsm
    standard breather filter 1 multi fit npt/ bspt/ npsm 0
    standard breather filter 1 multi fit npt/ bspt/ npsm 1
    standard breather filter 1 multi fit npt/ bspt/ npsm 2
    Produktbeskrivelse:
    Des-Case Standard breathers provide simple, yet dependable protection from moisture and particulate contamination in lubricants and equipment across multiple industries and applications. These versatile breathers are five times more effective than the leading non-desiccant breathers, providing optimal defense against humidity for your applications.
     
    Benefits
    • Removes moisture in the headspace of equipment
    • Eliminates rust-forming condensation
    • Prevents sludge deposits and water-contaminated oil
    • Prevents contamination ingress
    • Provides longer lubricant life
    • Reduces wear and tear on equipment, prolongs life
     
     
     
     
    How it works
    The desiccant breather replaces the standard dust cap or OEM breather cap on equipment. As air is drawn into equipment through the breather, the layered filter elements remove particulate while the desiccant beads strip harmful moisture. While in service or during shut-down, the desiccant beads attract moisture from inside the equipment reservoir, actively drying the equipment. 
     
    Seeing Pink? 
    A pink breather means it has done its job keeping moisture out of your lubricants. 
    Time to replace the breather with a new one.
       
    Send forespørsel
    Send forespørsel
    Spesifikasjoner:
    Technical specifications: 
     
    Unit Height (in/mm): 6.125 / 155.6
    Unit Diameter (in/mm): 4 / 101.6  
    Connection Size:  1" Multi-Fit (NPT, BSPT, NPSM)  
    Amount of Silica Gel (lbs/kg): 0.66 / 0.30 
    Adsorption Capacity (fl oz/ml): 4.00 / 118.2   
    Max. Flow Rate (cfm): 16 @ 1 psid 
    Max. Flow Rate (lpm): 453 
    Filter Efficiency: 3µ absolute (β₃≥200)  
    Operating Temp. Range (°C): -29° to 93° 
     
     
    Max. Airflow at 1 psid: 16 cfm / 453 lpm 
    Gearbox / Storage Tank: 200 gal / 757 L 
    Hydraulic Reservoir: 60 gal / 227 L 
     
     
    *Please Note: 
    This is intended as a general guideline for sizing only; other considerations, such as: humidity level, frequency of air flow, ambient temperatures, and chemical compatibility are very important in sizing a breather properly. Larger applications and special circumstances typically require the most thorough analysis. 
    Please contact Ditech AS for assistance in sizing a breather. 
    Produkt tegning:
    Des-Case Standard Series product drawing:
     
    Har du spørsmål om produktet?