Totalt
    Vis handlekurv
    Varenummer:
    RA6000002

    Hydra Hot Self-Cleaning Filter 90µm, 3/4" Plastic BSP Threads

    Leverandør:
    Atlas Filtri
    Dimensjon:
    H:390xW:120xD:107 mm
    Vekt:
    1.3
    Lager:
    4
    hydra hot self cleaning filter 90µm/ 3/4 plastic bsp threads
    hydra hot self cleaning filter 90µm/ 3/4 plastic bsp threads 0
    hydra hot self cleaning filter 90µm/ 3/4 plastic bsp threads 1
    Produktbeskrivelse:
    HYDRA HOT Single-stage self-cleanig filters - With Plastic BSP Threads

    THE HYDRA HOT SELF-CLEANING FILTER FOR HOT WATER OFFERS ALL OF THE CONVENIENCE AND SIMPLICITY OF A SELF-CLEANING SYSTEM, GUARANTEEING GREATER EFFICIENCY AND CLEANING WITH VERY HIGH WATER TEMPERATURES.

    Available with RAH HOT cartridges, with AISI 316 stainless steel net, it is equipped with IN/OUT connections 1/2", 3/4", 1” with plastic thread BSP or NPT.
    The capacity intervals go from 3500 to 6000 l/h. The counter-current washing cleaning operation can be activated by opening the drain ball valve on the bottom of the filter.
    Starting from the search for low environmental impact products, all the way to each production process, Atlas Filtri dedicates maximum attention to respecting the environment. All materials used for the Hydra Hot self-cleaning filter are tested to guarantee better quality, in line with international standards.


    Technical feautures
    • Hot water self-cleaning filter with counter-current washing cleaning system
    • Suitable with RAH HOT cartridges with AISI 316 stainless steel net, filtration 90 micron
    • IN/OUT female 1/2", 3/4”, 1” connections
    • Plastic thread BSP or NPT type
    • Head: reinforced nylon
    • Bowl: reinforced nylon
    • Drain valve for manual cleaning
    • Kit auto available
    • Capacity intervals from 3500 to 6000 l/h
    • Maximum operating temperature: 80°C (176° F)
    • Maximum operating pressure: 8,6 bar (116 psi)


    Benefits
    • Atoxic materials, suitable for potable water
    • Designed specifically for high temperatures
    • Suitable for technical and industrial uses
    • Easy maintenance
    • Wide range of accessories 
     
     
     
     
     
    Send forespørsel
    Send forespørsel
    Spesifikasjoner:
    Technical specifications:
     
    Max working pressure: 8,6 bar (125 psi)
    Min working pressure: 1,8 bar (26 psi)
    Max working temperature: 80°C (176°F)
    Min working temperature: 4°C (39,2°F)
    Non-toxic materials.
    Head: reinforced nylon.
    Bowl: reinforced nylon.
    O-ring: EPDM.
    Breather-valve: body stainless steel, o-ring EPDM.
    Discharge ball-valve: CW 617 N brass nickel plated.
    Drain funnel: reinforced polypropylene.

    Nominal Filtration Micron: 90
    In/Out: 3/4"
    Flow Rate l/h: 5000 
    Dimensions (mm)
    A: 390
    B: 120
    C: 107 
     
     
     
     
     
    Certifications:
     
     
    Har du spørsmål om produktet?