TM-P Magnetic Bag Filters 4 – 20

HiFlux TM-P Magnetic Bag Filters are used where there is a need for reliable removal of magnetic particles and combine the advantages ofbmagnetic and bag filtration.

The TM-P filters are used for partial flow filtration in district heating and cooling installations, as both magnetic and non-magnetic particles of less than 1 micron are retained in the filter.

Partial flow filtration is used in recirculating systems where there is a requirement for continuous flow, also during filter cleaning. Efficient removal of dirt and magnetic particles from the liquid reduces the number of breakdowns in the system and increases the life of measuring equipment, heat exchangers, pumps, valves and other components significantly.

In partial flow filtration 5-15% of the total flow is led out of the system and pumped through the magnetic bag filter, and is then led back to the system – cleaned of sludge and magnetite. As the partial flow filter is not located in the main circuit, the flow through the filter can be interrupted and the filter cleaned without interrupting the main flow.

Continuous reduction of the sludge content reduces sedimentation in heat exchangers, pipes and other components, helping to keep the heat transmission performance at a maximum and reducing corrosion in the system. Friction is also reduced in mechanical measuring equipment and errors in connection with inductive measuring are minimised, which is why it is possible to achieve more reliable energy consumption measurements.

The magnetic bars in the filter are located in conducting pipes, which leads the liquid through a magnetic field generated by magnets with changing polarity. This induces a field around even the smallest particles and so provides efficient retention of particles of less than 1 micron. The filter will actively retain ferromagnetic particles and some iron oxides of the Fe3O4, g-Fe2O4, d-Fe2O3 type and other mixed oxides of Fe3O4, where the spinel structure FeO is substituted by other oxides, e.g. CoO, MnO, NiO, ZnO, Cr2O3.

Fitted with the highly efficient HiFlux magnetic system, which provides a magnetic field that is seven times stronger both efficiency and capacity can be increased significantly.

Non-magnetic particles are retained efficiently in the filter bag (see also data sheet for filter bags).

HiFlux Filtration A/S manufactures several solutions for these applications, both as individual filters or as complete systems with pumps and measuring equipment – see data sheets for HiFlux TM-P Unit, HiFlux Micro-Line 1050, HiFlux Micro-Line 1050 SS and HiFlux TP filters or receive special information about filtration in energy systems by
post.